Product list
Emergency rescue equipmentContact us
If you are interested in our products, please contact us.Jiangsu Mingjie Emergency Rescue Equipment Co., Ltd.
ADD：
North side of Jianggao Road, Zhonglian Village, Yexu Town, Gaogang District, Taizhou, Jiangsu Province
TEL：15152669837
FAX：
Email：
Life saving equipment
·Life-saving lighting lines are suitable for lighting guidance and evacuation in dark places such as subways, basements, underground, stairs, etc. The life-saving lighting line is mainly composed of a power input cable, an illumination line body, a dedicated distribution box, a bobbin (disc) and the like.
Scope of application:
This product is used in subways, tunnels, civil air defense projects, large passenger ships, freighters, underground nuclear power plants, high-rise buildings, large underground shopping malls, warehouses, caves, and other aspects of emergency, exploration of disasters, life-saving escape and other lighting instructions.
The main technical parameters:
1. This product is based on the standard GB26783-2011. 2. The wire body is a 10.5mm PC material cold light source LED lamp bead.
3. The wire body can be used normally in the environment of -20 ° C ~ 60 ° C. 4, line body tensile force > 300N.
5, line body dustproof and waterproof level IP44.
6, with high brightness and low heat performance.
7. The power distribution control box has leakage protection and short circuit protection function, and the maximum breaking (protection) time is ≤0.2s.
8. Emergency power supply is available, and the emergency time is more than 3 hours.
Instructions:
1. Plug the power cord into the emergency power connector. 2. The lighting line is plugged into the lighting line interface (head).
3. Close the emergency power switch. After 10s, slowly close the inverter switch. After the inverter switch light is on, close the illumination output switch.
4. The output indicator lights up and the illumination line lights up.
Charging:
1. When the emergency power supply voltage is lower than 11V, it should be charged in time.
2. Turn off the emergency power switch, inverter switch and lighting output switch when charging.
3. The charger is plugged into the charging interface and the charging indicator lights up.
4. When charging, the red indicator light is on, and the green indicator light is on when fully charged.
5. The charging time is 12 hours.
note:
All switches in the control box should be closed when not in use.
Configuration:
One emergency power supply, one charger, one distribution box, one lighting line box, one pay-off line, one lighting line, and one power line.
相關推薦
